Products | Tablesaws

Thumbnail

Fusion1 Table Saw

Thumbnail

Rear Extension Table With Support Legs

Thumbnail

2 Handwheels For Blade Control

Thumbnail

Onboard Accessory Storage

Thumbnail
Thumbnail

Onboard Storage For Push Stick

Thumbnail

Rip Scale In Both Millimeters and Inches

Thumbnail

Hi / Low fence With Dual Reading Points On The Scale

Thumbnail

Rear MDF Extension Table

Thumbnail

Mitre Fence Adjustable 60 Degrees Each Way

Thumbnail

Quick Removal Throat Plate

Thumbnail

Quick Tool Free Riving Knife Removal

Thumbnail

Tool Free Spindle Lock

Thumbnail - copy

Rapid Blade Removal

Thumbnail

Accurate Rip Cuts Up To 760mm (30") Wide

Thumbnail

Mitre Guide Can be Use On Either Side Of The Blade

previous arrow
next arrow
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail
Thumbnail - copy
Thumbnail
Thumbnail
previous arrow
next arrow

£1199.00 Inc. vat

£999.17 Excl. vat

l   New For 2024
l   Polished Cast Iron Table
l   1450w (1.9hp) Induction Motor
l   79mm (3") Cutting Depth at 90 degrees
l   Above & Below Dust Kit with 100mm Hose Outlet
l   2 T-slots for Sliding Mitre Fence
l   Includes Rear Extension Table  

Fusion1 Tablesaw

An entry level, classic US style, table saw which looks and performs as well as the original versions.

The new 2024 model has a large precision ground mirror finished cast iron tabletop with additional steel fabricated tables to the left and right giving an overall table width of 112cm (44"). An MDF rear extension table increases the table depth to 130cm (50"), adding further stability when ripping long lengths.

The classic 'T Style' rip fence, glides smoothly on nylon pads and is rock solid when locked using the cam lock soft grip handle. The Hi-Lo fence design allows narrow cuts even in thin material without fouling the blade guard. The measuring scale is marked in both metric and inches. Two sight lines, for Hi and Lo fence position, ensure accurate fence setting to the desired cutting width. A storage clip ensures that the push stick is always within reach when you need it. 

The cast iron table has 2 T-slots which can be used with the sliding crosscut mitre fence. It has an aluminium body, with an adjustable steel fence rotating to 60 degrees each way with preset stops at commonly used angles.   

Blade adjustments are made using 2 hand wheels. The front hand wheel, for adjusting blade height, has a spindle lock, perfect for accurate non-through cuts. The side hand wheel is used to tilt the blade angle which can be easily read of the large scale on the front of the cabinet.

The 'zero clearance' throat plate, supplied as standard, has fine adjustment screws to precisely set it to the table surface. To speed up blade changing operations the throat plate has quick action removal, the riving knife has quick action removal and there is a tool free spindle lock.

The heart of the saw is the powerful braked motor which is mounted under the cast iron table via solid cast alloy trunnions. A drive belt transfers power to the blade arbor which has sealed and permanently lubricated long life bearings.

The fusion design has an emphasis on superior dust collection for operator safety and machine longevity. Utilizing over/under collection.  All dust is collected through a single 100mm diameter port at the rear.

The standard equipment also includes: on-board storage for the rip fence and mitre fence, 40 tooth TCT sawblade, fence mounted push stick, 1.8m power cable with UK 3 pin plug.

 

Specifications

Part Number FUSION1
Motor (Induction) 1450w (1.9hp)
Power Supply 220-240v / 50Hz / 1 phase
Blade Diameter / Bore 250mm (10") / 30mm
Minimum Blade Width (Kerf) 3.0mm
Maximum Depth of Cut @ 90° 79mm (3.1")
Maximum Depth of Cut @ 45° 56mm (2.2")
Blade Tilt 45° Left, 3° Right
Fence Type Sliding Cam Action, Fully Adjustable
Rip capacity  760mm (30")
Fence face height (Hi/Lo) 80mm / 10mm (3" / 0.4")
Mitre slot (x2) 19mm to 23mm T slot (3/4" to 1")
Throat plate type Professional square zero clearance
Power cable 1.8m with UK 3 pin plug
Arbor speed 3800rpm
Dust collection: Outlet diameter  100mm (4")
Dust collection: Minimum airflow 934m3/h (550cfm)
Floor to Table Height 887mm (35")
Assembled dimensions (WxDxH) 1550mm x 1405mm x 1100mm
Shipping dimensions (WxDxH) 1330mm x 700mm x 790mm
Weight (net / ship) 110kg / 120kg
Manufacturers warranty 1 Year
Assembly time 2 Hours

Dado Sets: We are frequently asked about the use of Dado sets, something which is common practice in Laguna's homeland, the USA. The rules and regulations are different here in the UK and in Europe. To operate a table saw safely: a crown guard must be in place at all times. When using a Dado set the crown guard is removed and therefore this is considered unsafe and not allowed in the workplace unless an overhead guard has been installed. 

Product Videos

*Please note: The videos shown here feature the product in North American specification. European specification has several differences due to legal requirements. The product on sale in the Europe does have some visual differences and the specification may differ slightly.

loading videos
Loading Videos...

 

Accessories

FUSIONZ:
Replacement zero clearance throat plate

£74.95 inc. VAT
£62.46 excl. VAT

Our Address

Laguna Tools UK
Walker Road,
Bardon Hill,
Leicestershire,
LE67 1TU
United Kingdom

Tel: 01530 516921
sales@lagunatools.uk