C|Flux3/3 Cyclone Dust Extractor
Superior Cyclone Performance - Achieved by 2 Stage Separation
2 Stage Separation - chips, Shavings and Fine Dust Particles are Collected in the Drum, Extra Fine Dust is Collected in the Canister Bag.
Supplied as Standard with a 1 Micron Canister Filter - Highly Pleated to Increase the Surface Area & Maximise Airflow
Horizontal Chute - Designed for Maximum Airflow
Filter Cleaning Uses A Dual Paddle Design. On CFLUX3 Model, Rotated By A 270 Degree Crank Handle.
Filter Canister Cleaning - 270 degree Manual Crank Handle
Unique Drum Lift Action is Quick & Easy to Operate
Built to Last - Quick Action Drum Lift Mechanism
Lowering the Lever - Raises and Seals the Drum Into Position
Drum is on wheels for Easier Emptying
Collection Bag Inside the Drum - Held in Place with a Metal Insert
Plastic Bag Collects Extra Fine Dust From the Filter Canister
Induction Motor 2200w (3hp) / 415v / 50Hz / 3 Phase
Collection Drum Volume - Now Increased to 175 Litres
How Often Do You Empty The Drum? When It Reaches The Max. Fill Line
The Hose Inlet Can Be Assembled In 5 Different Positions: To suit Your Workshop. The On/Off Switch Panel Can Also Be Assembled In Different Positions For Greater Accessibility.
Impellor Type: 390mm (15.5") Diameter, Steel Radial Fin
3 Way Splitter Gives 3 x 100mm (4") Diameter Inlets, 1 x 200mm (8") Diameter When Removed
Redundant Hose Inlets Can Be Closed Off With The Rubber Caps Provided
Heavy Duty Castors For Mobility
2 Of The Castors Are Fitted With Locks
Supplied With A High Frequency Remote Control For Start & Stop
Cyclone Is Supplied With A fitted 3 phase Industrial Plug
£3199.00 inc vat
£2665.83 ex vat
Why choose a Cyclone over standard bag extraction?
Cyclones offer a more consistent and superior performance. They achieve this by effectively separating the heavy waste material from the fine dust, before the airflow passes through the fan. This allows the fan to operate more efficiently at a consistent speed.
The fine canister filters on cyclones also last much longer before requiring cleaning, helping to sustain a high airflow and reducing maintenance time.
The CFLUX range is a workhorse which represents a quantum leap for cyclones. With remote start as standard, they are suitable for either dedicated single machine use or as part of a small ducting system around the workshop.
The 2022 model has several upgrades which all improve the performance of the machine:
- The size of the collection drum has increased by 40% - Less time spent emptying.
- Additional filter cleaning paddle added - Deeper cleaning maintains maximum air flow.
- Locks added to two of the castors - Increased stability.
The horizontal chute is designed to maximize airflow. All shapes and dimensions have been designed to optimize that performance. The fan is housed inside a single piece horizontal plenum which reduces airflow resistance.
The CFLUX range is supplied as standard with a 1 micron canister, highly pleated to increase the surface area and maximise airflow. Canister cleaning is provided using the crank handle attached to internal paddles.
The Ingenious smart lift system quickly engages or disengages the collection drum using a simple lever action. The octagonal shaped drum is lifted off the floor and seals against the drum lid. With the drum in the lifted position, the CFLUX3 is fully portable on the four sturdy castors mounted to the frame. Once lowered, the drum sits on another set of castors and can quickly be rolled to wherever emptying is to be carried out.
When it comes to measuring airflow, there are may ways to do it. Laguna quote the traditional method, for comparison against other brands, as well as a more realistic method which gives a 'real world' result. Visit the cycology page for more information.
Supplied with remote start handset, 1 collection bag for main drum, 1 collection bag for filter dust, 1.8m power cable with fitted 5 pin 32 amp industrial plug.
|Power supply||415v / 50Hz / 3 phase|
|Recommended breaker size (MCB)||32 Amps (type C)|
|Airflow (Traditional method)||3831 m3/hour (2253 cfm)|
|Airflow (Realistic method)||2209 m3/hr (1299 cfm)|
|Max. static pressure||285mm in water (11.2")|
|Canister filter type||Polyester spun bond|
|Filter surface area||9.5m2 (109 sq/ft)|
|Filtration efficiency||99.7% @ 1 micron|
|Filter collection bag layflat size||660mm x 620mm (26" x 24.5")|
|Hand held remote control||High Frequency|
|Inlet diameters||1 x 200mm or 3 x 100mm (1 x 8" or 3 x 4")|
|Impeller fan type||390mm (15.5") Steel radial fin|
|Impeller fan speed||2800rpm|
|Drum collection capacity||175 Litre octagonal drum|
|Collection bag hold down||Metal insert frame|
|Drum collection bag layflat size||960mm x 1200mm (38" x 47")|
|Filter Canister cleaning||Manual crank 270 degrees|
|Sound level||88 dB(A) @ 3m|
|Power cable||1.8m (6ft) 5 x 2.5mm wire|
|Assembled dimensions (W x D x H)||692mm x 1407mm x 2276mm|
|Shipping dimensions (W x D x H)||1270mm x 800mm x 1300mm|
|Weight (Net/Ship)||146Kg / 176Kg|
|Manufacturers warranty||1 Year|
|Assembly time required||6 Hours (Needs 2 people)|
" If you are in the market for a new dust collector or are looking to upgrade to a cyclone model, we highly recommend you consider the Laguna C-Flux. It is a true dream to use and the performance is there to match " […] Read More
Please Note: There may be minor differences in the specification and appearance between the European model and US model featured in these articles.
Pack of 10 Polythene collection bags to fit inside the 125 Litre Octagonal Drum (2018-2021)
Layflat Size: 960mm x 960mm (38" x 38")
£20.00 inc. VAT
£16.67 excl. VAT
Pack of 10 Polythene collection bags to fit underneath the Cartridge filter
Layflat Size: 660mm x 620mm (26" x 24")
£13.00 inc. VAT
£10.83 excl. VAT
Pack of 10 Polythene collection bags to fit inside the 175 Litre Octagonal Drum (2022 Onwards)
Layflat Size: 960mm x 1200mm (38" x 47")
£20.00 inc. VAT
£16.67 excl. VAT